Tag: jersey

Master Knitter Level I – Swatches #1, #2, & #3Master Knitter Level I – Swatches #1, #2, & #3

I have completed the first three swatches for the TKGA Master Knitter Level I program. As I mentioned in an earlier post, I discovered an issue with tension that I did not realize I had. And over the last few weeks, I have done quite a bit of reading about tension and an equal amount of knitting, reknitting, and being much more aware of HOW I knit. This is one of the purposes of the Master Knitter program — it makes you think about your craft and helps you identify the bad habits you have developed over time.

I have decided to use this blog as I way for me to document the lessons learned as I proceed through the Master Knitter Level I program. Hopefully, others will find my notes and comments helpful and will also learn from them. So, here is the first of my “lessons learned”:

Swatch #1 — 2 X 2 Ribbing & Garter Stitch
Garter stitch (knit all rows) was fairly easy for me — the key is to maintain an even tension throughout knitting the rows.

Tension can be a real issue with 2 X 2 Ribbing, because most knitters tend to purl more loosely than they knit. [I do]. The result of this tendency is that your ribs are formed of uneven stitches and appear “wonky”. My first attempt at this swatch was definitely “wonky”. After much researching, knitting and reknitting, I determined that I was really out of practice purling because I had been knitting projects mostly “in the round” and this was part of my problem. So, I spent some time just purling and working on my tension — trying to get it more consistent. I eventually managed to obtain a fairly even tension with my ribs. From my reading, I think that the unevenness on the edges is normal and should be satisfactory.

Swatch # 2: 1 X 1 Ribbing and Stockinette Stitch
Swatch #2Tension was also an issue for me with the 1 X 1 Ribbing. With this ribbing, I found that my looser purl stitches really impacted the shape of the ribs. Again, I found that I really needed to practice purling and focus on keeping my tension even when doing the ribbing.

For the Stockinette Stitch, I was able to obtain the even fabric required — but only after I had worked on my purling. The evenness isn’t as noticeable on the right side — you need to look at the wrong side of the fabric and make certain that there isn’t a distinct difference in your rows between the knit rows and the purl rows. Along the way, I discovered that I knit fairly loosely and I had to go down one needle size to achieve a decent fabric.

If you are trying to correct uneven tension when ribbing, here are a couple of ways to do so:
1) Just try knitting with an even tension; 2) Give your yarn and extra tug when moving it to the front of the needle and before purling; 3) Try wrapping your yarn under your needle when purling — note, this makes the stitches sit on the needle with the back loop leaning forward — to avoid twisting the stitch you must knit through the back loop rather than the front when knitting; 4) Try purling using the Norwegian Purl method [link to video here].

Swatch # 3: Seed Stitch
Swatch #3
Swatch # 3 was a sample of Seed Stitch — which is K1, P1 across the row over an even number of stitches. The goal here is to produce a nice even fabric with no visible holes between the knit and purl stitches. This is another tension challenge. It took me three swatches to produce the swatch shown. I finally came to the conclusion that I was over-doing the tension, basically trying too hard — and once I relaxed a bit on this, I got a better result.

In summary, here’s what worked for me: 1) After practicing, I needed to relax a bit — I got to the point that I was pulling my purl stitches so tightly that I made my knitting even less consistent. 2) Remembering to do that little extra tug when putting the yarn in front to purl. 3) For the edges — giving the yarn an extra tug when knitting off the last stitch on the row, followed by giving an extra tug after knitting the first two stitches on the next row. (more…)

Stitch Patterns – Garter Stitch, Stockinette Stitch & Reverse Stockinette StitchStitch Patterns – Garter Stitch, Stockinette Stitch & Reverse Stockinette Stitch

I have decided to blog about various stitch patterns from time to time. So I am starting with the time honored basics: the garter stitch, the stockinette stitch and the reverse stockinette stitch.

This discussion assumes you know how to do a knit stitch and a purl stitch. If you are new to knitting and are not familiar with these two stitches, click on this link: http://www.knittinghelp.com/videos/knit-stitch.


Garter Stitch: this stitch pattern is made by knitting every row, turning your knitting at the end of each row. (You would get the same effect if you purled every row – but most knitters prefer to knit every row). If you want to knit garter stitch “in the round”, you would knit one row and then purl one row – so most patterns using garter stitch are for flat pieces rather than circular knit pieces. The pattern produces a knitted fabric with ridges on each side that is essentially reversible – it looks very much the same on the right side as the wrong side. It takes two rows to make 1 ridge. The garter stitch is great for borders because it will not curl and lays flat once knitted. Many afghan and baby blanket patterns have a garter stitch border and it is often used as the basis for wash clothes and placemats.


Stockinette Stitch: this stitch pattern is the most commonly used knitted fabric. This stitch pattern produces a fabric with flat “V” shaped stitches on the right side and bumpy stitches on the wrong side. It is also known as flat knitting, tricot or jersey knit. Stockinette stitch consists of knitting one row, turning your work and purling one row if you are knitting a flat piece. If you are knitting in the round, you knit every row. Stockinette stitch fabric curls on the edges and at the top and bottom – it makes a good fabric for the body of a garment, but usually requires another stitch pattern for edging and or borders. It also stretches lengthwise when worn.


Reverse Stockinette Stitch: this is exactly what it sounds like – it is simply stockinette stitch fabric used with the purl side as the right side. It has all the properties of the stockinette stitch, but in addition, it will also stretch widthwise. You can see how the 3 stitches differ in the picture below:

If you look at the pictures of my teddy bear baby blanket – you will see how the teddy bear is formed by using the stockinette and reverse stockinette stitches together to form the pattern. This is a good example of how they can be combined to form textured patterning. Aran knitting patterns often combine stockinette, reverse stockinette and garter stitches as part of the textural patterning. Again, here are examples where the stitching is actually very straightforward and easy – but produces a fabric that looks complex because of the wonderful textures.

Note: For information on tension issues occurring with garter stitch, stockinette and reverse stockinette stitch, see my post on Master Knitter Level I — Swatches #1, 2 & 3.