Team Knitting: Socks for Soldiers

November 12, 2009| Lindy| 0 Comments | 10:28 am

Categories:

Socks for Soldiers has a group of members who own working antique circular sock machines (CSM). These are amazing little machines that were designed to knit socks during the WWII era. I did a little searching on the web and found out that these machines often sell for between $1500 and $2500 refurbished and there are actually a few companies that refurbish these machine and keep them working. I’m including a link here if you are interested in taking a look. They actually look rather daunting.

Now, the knitters with the CSMs spend their time and yarn making those 12 inch long ribbed legs. Then they put the leg on a lifeline and send it off to a team member who knits the heel, foot and toe by hand. This speeds up the process for producing the SFS regulation socks significantly. I have recently teamed up with a CSM knitter and she just sent my first pair of CSM legs. Here’s a picture:
SFS_CSMLegs1

These legs are amazing! My team mate, Peggy, tells me that it takes her about 5 minutes to knit 1 leg on her CSM. However, the CSM itself takes longer to set up and encourage to actually knit. When we first corresponded, she also asked me if I was a right-handed or left-handed knitter. (I’m right-handed.) Seems you have to run the lifeline differently for left-handed vs. right-handed knitters. So, here are the CSM legs, close-up of the lifeline, and ready for me to put onto my needles and begin the heels. I plan to start them this evening, so hopefully I will get another pair of SFS OD regulation socks done well before Christmas.

1 thought on “Team Knitting: Socks for Soldiers”

Amanda says:

November 13, 2009 at 10:04 am

Wow, I bet that speeds up this pair alot! It seemed like the looooong legs of that last pair took forever!

I think this is a really neat idea!

Comments are closed.

FO: Plain Vanilla Socks in Serenity Sock YarnFO: Plain Vanilla Socks in Serenity Sock Yarn

June 14, 2010| Lindy| 0 Comments| 2:39 pm

I have finished my Plain Vanilla Socks knitted in Serenity Sock Yarn (Premier yarns), colorway Amethyst. This is the yarn that I wrote about in a previous post: “A Study of Pooling in a Variegated Sock Yarn”. As I discovered in my study of how this yarn pools, by using 54 stitches on size US 2 (2.75mm) needles, I got a “striping” effect as the yarn pooled. You can see the result in the picture above.

Serenity Sock Yarn is a variegated yarn with color changes that are fairly short and don’t necessarily produce stripes when the number of stitches increases. The yarn itself has a nice soft feel to it and it knits up nicely, but I did experience a tendency of the yarn to split at times. The yarn is 50% Merino Wool, 25% Bamboo and 25% Nylon and has sufficient stretch for a well-fitting pair of socks. Anyone planning on using this yarn should definitely knit a swatch with the number of stitches they are planning to use for their socks to see if it knits up in a way that they like.

There was a pattern printed on the inner label that called for a gauge of 9 spi on US 2 (2.75mm) needles. The pattern is based upon 64 stitches. Now, I got an spi of 6.25 on US 2 needles, which is a significant difference and I cannot speak to how it would pool at the stated gauge of 9 spi. I know that I knit more loosely and guess that in order to obtain 9 spi, I would have to use US 0 (2.25 mm) or US 00 (1.75 mm). I really prefer to knit socks on a little bigger needles. These socks were for me to wear around the house and they fit my feet perfectly.

As for the pattern used for these socks — I really didn’t use one. I knit a 3 X 1 ribbing for 1.5 inches, then switched to stockinette stitch and knit until the cuff measured 6.5 inches. I did a short row or mitered heel and then knit the foot and toe in stockinette and grafted the toe when I had 9 stitches remaining on each side of the sock. I used the Magic Loop method and knit the socks two at a time.

WIP: Socks for DSWIP: Socks for DS

January 11, 2010| Lindy| 0 Comment| 5:20 pm

My DS put “socks that won’t wear out at the heels” on his Christmas list. It was a late request – and not one that would I would likely be able to meet by Christmas – but it was an invitation to knit socks for someone I love!

MattsSocks_Foot2 So – I started a pair of socks – plain label version, cuff-down with 2 X 2 ribbing for the heel and instep. I used Knit Picks Stoll in Carbon Twist colorway. I got about 6 inches of the cuff done before Christmas and so I wrapped the “in progress” socks up along with two additional balls of yarn (Knit Picks Stoll – Merlot colorway) for another pair of socks and gave it to him as a Christmas present, with the promise that they would actually become socks.

The Carbon Twist socks are now about 75% complete – I am working on the foot and heading for the toe. I love the way this yarn knits up – it’s great for a pair of men’s socks. I knit the cuff for 6 inches on size US 1 needles (2.50 mm) and then went down to size US 0 (2.00 mm) for another 2 inches on the cuff , the heel flap and approximately half of the gusset before switching back to the larger needle. This produces a denser knit heel and should increase the wearbility of the socks. I intend to knit the toes on the smaller needles for the same reason.

For the Merlot colorway yarn, I am planning on doing the “Manly Aran” socks pattern from Antje Gillingham’s Knitting More Circles around Socks. This is a toe-up pattern and I am looking forward to trying this out using Magic Loop.

Things Learned from a SwatchThings Learned from a Swatch

October 12, 2009| Lindy| 2 Comments| 8:00 am

It took me years to appreciate the value of doing a swatch before starting a knitting project. I cannot tell you how many poorly fitted sweaters I knit before I came to realize that it truly was worth the time and effort to swatch first.

I learned this when I bought my first knitting machine. You see, when you are using a knitting machine, you can’t even get started without doing that swatch – as you need it to tell you if you have your machine tension set up correctly. It only takes one frustrating experience with a too tight tension on the knitting machine to convince you of the necessity for doing a swatch or two.

Swatching also provides you as a knitter the freedom to become, as Elizabeth Zimmermann says, “The boss of your knitting”. If you know your gauge, and understand the basics of the design you are wanting to make – you are free to modify any pattern – or MAKE YOUR OWN.

So, I always swatch. This last weekend I did a swatch using the Baby Ull yarns that I purchased to knit a sweater and romper for my new grandson due the end of January. I had a couple of extra reasons for doing this swatch beyond determining what size needle I needed to obtain the stated pattern gauge. First, I wanted to try out the three color pattern for the sweater and get comfortable with it. Second, I wanted to see if I liked the color combinations of the yarns in the color pattern.

Swatch_Cardigan1 Here’s a picture of the swatch. I cast on 44 stitches so that I could have a 40 stitch area surrounded by a 2 stitch garter stitch edging. I started using US 2 (3.00 mm) needles and then switched to a smaller US 1 (2.50 mm) needle for the last part of the swatch. I did a section of garter stitch, then stockinette stitch, then the color pattern using the lighter aqua blue as the main color and then switched to using the darker teal blue as the main color. I finished the swatch by doing a section of sockinette stitch on the smaller needles, followed by a section of garter stitch.

Here’s what I learned from this swatch: 1) I need to use smaller needles than what is stated in the pattern in order to obtain gauge. This is important because I want this sweater to fit. 2) I like using the darker teal blue as the main color – I think the lighter aqua blue shows up better against it than the other way around. This is significant – because I bought 7 balls of the lighter aqua and only 1 ball of the darker teal. (I have now ordered enough teal to make the sweater, as my LYS did not have enough of it on hand…) 3) The 3 color pattern is fairly simple and easy to knit. I think it’s good to practice such things before starting off on a special project like this.

So to those readers who “hate to swatch”: do you see the value of what I did here? Swatching is a valuable technique that helps you be the “boss of your knitting”. Now go swatch!