The Roomba Ate My Socks!

Roomba
I have a Roomba – which is a small robotic vacuum cleaner. You are supposed to be able to contain it to a single room using little devices called “lighthouses”. I really like this little guy for frequent vacuuming of my kitchen. So, the other day, I turned it on and left it to run around the kitchen while I did some things in my office.

Well, it escaped the kitchen and headed off into the living room – where my two at a time socks using magic loop project was laying beside my recliner (I’d left them there the night before) …AND…the Roomba ate my socks!

I heard this weird little sound coming from the living room and went to investigate – and there I found the Roomba thrashing about entangled in my 40” circular needle and the yarn from one of the socks. (I was so traumatized that I forgot to take a picture.)

After turning the Roomba off, it took me several minutes to remove the yarn from around the various moving parts and then deal with the fact that the circular needle had somehow ended up wrapped around one of the wheels. Eventually, I succeeded in extricating my circular needle – but it was a close call, as I had begun to consider the possibility of having to cut the cable. (WHEW!) Fortunately – one sock was still on the circular needle. The other, however, was laying in the middle of the floor – off the needle and minus its ball of yarn. I tenderly picked up this wounded creature and set it aside to recover from all the trauma.

I discovered that the lighthouse that should have prevented Roomba from going into the living room wasn’t working (dead batteries). Once I replaced the batteries, the darn little thing worked just fine and stayed in the kitchen where I wanted it to be.

Socks_BackTog
Happy News! – I was able to frog the wounded sock back to a point that I knew where I was in the pattern and then pick up the stitches and reconnect the yarn to the sock as I reknit it back to where it had been before it was attacked by the Roomba. It is now back on the same circular needle with its brother.

3 thoughts on “The Roomba Ate My Socks!”

  1. …or a lighthouse to set right next to that recliner! Oh, my goodness! I would have *cried*! I spend enough time froggin’ stuff due to my own errors! 😉

  2. Oh. MY. GOODNESS!!! I laughed and cried…it must have been quite a sight, but Oh, your poor socks!! Glad you were able to rework the wounded one. (Maybe this is why I only do 1 at a time on ML?! Nah, it’s cuz I mix up the yarn & knit them together!)

Comments are closed.

Related Post

Summer Knitting: Dishcloths # 4 – 6Summer Knitting: Dishcloths # 4 – 6

I am now half way through my Summer Knitting project of knitting a dozen dishcloths. Here are the three I have just finished:

Dishcloth #4 – Crocus Buds
Knitted dishcloth in crocus buds pattern
Pattern from the Leisure Arts “Knitting Kitchen Brights Dishcloths” brochure. Yarn: Lion Brand Kitchen Cotton, color Banana. This was an interesting openwork pattern. The “crocus buds” are created by pulling a stitch over the next two stitches on the needle. It is a simple 6 stitch pattern over 4 rows with yarn overs creating the open patterning between the “crocus buds”.

Dishcloth #5 – Elfin Lace
Knitted elfin lace pattern dishcloth
Pattern from Leisure Arts “Knitting Kitchen Brights Dishcloths” brochure. Yarn: Lion Brand Kitchen Cotton, color Natural. Easy lace pattern, that knits up into a nice dishcloth. The Elfin Lace pattern is an eight stitch pattern done over 8 rows.

Dishcloth #6 – Trinity Stitch
Dishcloth knitted using the trinity stitch
Pattern from Leisure Arts “Knitting Kitchen Brights Dishcloths” brochure. Yarn: Lion Brand Kitchen Cotton, color Natural. Lovely textured pattern produced by using the “Trinity Stitch”. I loved knitting this one. The “Trinity Stitch” is a neat textured pattern.

Link to “Kitchen Bright Dishcloths” from Leisure Arts (2004).

Stitch Pattern: Elfin LaceStitch Pattern: Elfin Lace

The Elfin Lace pattern was used in Dishcloth #5 in my Summer Knitting project. This is an easy eyelet lace pattern made with a combination of yarn-overs and right and left leaning decreases.

Elfin Lace Pattern

The Elfin Lace pattern is a multiple of 8 stitches plus 9 done over 16 rows.

Row 1: (Wrong Side) and all wrong side rows – Purl.
Row 2: K2, *YO, SSK, K6. Repeat from *, end last repeat K5.
Row 4: K3, *YO, SSK, K3,K2tog, YO, K1. Repeat from *, end YO, SSK, K4.
Row 6: K4, *YO, SSK, K1, K2tog, YO, K3. Repeat from *, end YO, SSK, K3.
Row 8: K2, K2Tog, *YO, K5, YO, Slip 2 knitwise, K1, Pass 2 slipped stitches over. Repeat from *, end YO, K5.
Row 10: K6, *YO, SSK, K6. Repeat from *, end YO, SSK, K1.
Row 12: K4, K2tog, *YO, K1, YO, SSK, K3, K2Tog. Repeat from *, end YO, K3.
Row 14: K3, *K2Tog, YO, K3, YO, SSK, K1. Repeat from *, end K2Tog, YO, K4.
Row 16: K5, *YO, Slip 2 knitwise, K1, pass 2 slipped stitches over, YO, K5. Repeat from *, end YO, K2Tog, K2.

Repeat rows 1-16 for the desired pattern length.

Reference: Barbara G. Walker, A Treasury of Knitting Patterns

FO: Fancy Feet Anklets – “Monday”FO: Fancy Feet Anklets – “Monday”

Fancy Feet Anklets: Monday
It’s been a busy summer and I haven’t done much posting of late. Now that summer is winding down along with the Labor Day weekend, I intend to post a bit more often. So I will start with my latest FO. Awhile back, I purchased the “Fancy Feet Anklets” kit from Knit Picks. This kit contained 7 balls of Comfy Fingering weight yarn in 7 different colors and a set of 7 patterns, one for each day of the week. The idea being that you have a pair of anklets for each day of the week. Now, I have to confess that this kit has been hanging around it my stash long enough that it is no longer available on the Knit Picks website. (I just checked.)

I started knitting one of the patterns in the kit (Monday) earlier this summer when I was looking for a small, portable knitting project to take with me here and there as we traveled throughout the summer. This was a perfect portable project. The Monday pattern is a feather and fan type lace pattern. I used the colorway Blackberry and size US 0 (2.00 mm) circular needles, 47 inches long so that I could do magic loop and two-at-a-time. Now, because this is a lace pattern, it does require keeping track as you knit. The anklet is knit toe-up — which is not my preferred method for doing socks — but I think it is the most practical way to knit this type of short ankle sock.

Monday 2 anklets Monday anklet
A couple of comments/notes to myself for the next pair: The socks seem a bit too tight across the middle of my foot, so I think I will knit the next pair on slightly larger needles. The socks are also a wee bit short for my size 8.5 foot, so the next time I will knit them about 1/2 longer before starting the heel. The heel on these anklets is made by doing 60 short rows (yep, 60). You really have to keep track of where you are in the pattern when knitting the heel. I found it best to do the heel in one long stretch of knitting rather than attempting to stop somewhere in the process. I also have decided I really don’t like the wrap and turn technique used for the short rows, so the next pair will be knit using a different technique.

I like the socks, but since they don’t really fit me, my sister (who has smaller feet) will be getting this pair.