Yesterday, I had the role of being supportive of my DH while he underwent some tests at our local hospital. (Nothing serious, just part of routine maintenance for the over 55 crowd.)
Anyway, I decided to take along a pair of socks I am knitting as my “keep occupied” project for the time I would be sitting in the waiting area. I am doing cuff down, two at a time on 2 circular knitting needles. So I pulled out my knitting and started to knit away while I sipped on a cup of coffee. An older woman walked into the group of chairs where I was sitting — and pulled out her knitting!
She was knitting something on dpn’s in a pretty dark green yarn. For a time, we sat and knit without any conversation. Then, she put away her knitting and came over and sat next to me and chatted. (I think she was anxious about whomever she was waiting for, but she never really said.) I learned that she was working on a pair of mittens and she was very curious about the method I was using for knitting socks and my self-striping yarn. We exchanged bits of information about yarns and knitting and then she was called to go back with her family member while he/she recovered.
It’s interesting how knitting forms a link and an introduction for us. I know it made the time in the waiting room go by more quickly for me and I’d like to think it eased my companion’s anxiety a little and helped her time in the waiting room pass more pleasantly.
P.S. Started the socks so that I would have an easy knit project for the knitting guild meet ups. More on the guild in another post. I promise to post a picture of the socks when done.
My DS put “socks that won’t wear out at the heels” on his Christmas list. It was a late request – and not one that would I would likely be able to meet by Christmas – but it was an invitation to knit socks for someone I love!
So – I started a pair of socks – plain label version, cuff-down with 2 X 2 ribbing for the heel and instep. I used Knit Picks Stoll in Carbon Twist colorway. I got about 6 inches of the cuff done before Christmas and so I wrapped the “in progress” socks up along with two additional balls of yarn (Knit Picks Stoll – Merlot colorway) for another pair of socks and gave it to him as a Christmas present, with the promise that they would actually become socks.
The Carbon Twist socks are now about 75% complete – I am working on the foot and heading for the toe. I love the way this yarn knits up – it’s great for a pair of men’s socks. I knit the cuff for 6 inches on size US 1 needles (2.50 mm) and then went down to size US 0 (2.00 mm) for another 2 inches on the cuff , the heel flap and approximately half of the gusset before switching back to the larger needle. This produces a denser knit heel and should increase the wearbility of the socks. I intend to knit the toes on the smaller needles for the same reason.
For the Merlot colorway yarn, I am planning on doing the “Manly Aran” socks pattern from Antje Gillingham’s Knitting More Circles around Socks. This is a toe-up pattern and I am looking forward to trying this out using Magic Loop.
I have a Roomba – which is a small robotic vacuum cleaner. You are supposed to be able to contain it to a single room using little devices called “lighthouses”. I really like this little guy for frequent vacuuming of my kitchen. So, the other day, I turned it on and left it to run around the kitchen while I did some things in my office.
Well, it escaped the kitchen and headed off into the living room – where my two at a time socks using magic loop project was laying beside my recliner (I’d left them there the night before) …AND…the Roomba ate my socks!
I heard this weird little sound coming from the living room and went to investigate – and there I found the Roomba thrashing about entangled in my 40” circular needle and the yarn from one of the socks. (I was so traumatized that I forgot to take a picture.)
After turning the Roomba off, it took me several minutes to remove the yarn from around the various moving parts and then deal with the fact that the circular needle had somehow ended up wrapped around one of the wheels. Eventually, I succeeded in extricating my circular needle – but it was a close call, as I had begun to consider the possibility of having to cut the cable. (WHEW!) Fortunately – one sock was still on the circular needle. The other, however, was laying in the middle of the floor – off the needle and minus its ball of yarn. I tenderly picked up this wounded creature and set it aside to recover from all the trauma.
I discovered that the lighthouse that should have prevented Roomba from going into the living room wasn’t working (dead batteries). Once I replaced the batteries, the darn little thing worked just fine and stayed in the kitchen where I wanted it to be.
Happy News! – I was able to frog the wounded sock back to a point that I knew where I was in the pattern and then pick up the stitches and reconnect the yarn to the sock as I reknit it back to where it had been before it was attacked by the Roomba. It is now back on the same circular needle with its brother.
In my previous post, I discussed how to make a preliminary swatch to select the size needle that gives you a fabric that you like and then how to knit a gauge swatch. The gauge swatch is measured to give you your stitch gauge (stiches per inch) and your row gauge (rows per inch).
At this point, you might think you are ready to cast on and begin knitting your sweater – BUT….
Are you planning on using some type of ribbing for the bottom, cuffs and neckline of the garment? Are you planning on using a certain textured stitch pattern, a lace pattern or cables in your sweater? Will you be combining two or more stitch patterns in the body of the sweater? If the answer to any of these questions is “yes”, then you need to do more swatching.
Swatches with Borders: Have you ever knit something with a definite edge made by knitting either garter stitch or seed stitch and then found that the edges curl? The reason this happens is usually due to a difference in gauge between the stitch pattern used for the border and the stitch pattern used for the body. Thus, if you are knitting piece with a border that is different than the body of the piece, knitting a swatch with the borders on it provides you with an opportunity to make adjustments to minimize or eliminate the problem. Suzanne Bryan has a nice video on this that you may find helpful, here’s the link:
Note: I don’t recommend using garter stitch borders on gauge swatches even though others do. The border tends to distort the swatch and may affect the accuracy of your measurements.
Swatches of Ribbing: Ribbing by nature tends to “pull in”. Which means that 30 stitches of ribbing will have a smaller width than 30 stitches of stockinette stitch. How much of a difference can be quite significant and affect the way the garment fits around the hips and neck as well as around the wrists on a long sleeve. Also, some knitters find that their ribbing stitches appear larger than their stockinette stitches due to changes in tension. One solution for this is to use a smaller needle when ribbing – but if you do that you may need to have more stitches to get the right width of fabric for a proper fit. Knitting a swatch with your selected ribbing pattern followed by a transition to the stitch being used for the body of the sweater will provide you with the information you need to decide what you want to do. You might want to knit separate swatches with different ribbing patterns to select which ribbing you prefer to use in your garment. (You don’t have to use the same ribbing that the designer did for the pattern if you don’t want to…just saying.)
Swatches of Stitch Patterns:
In this post, stitch patterns refer to textured pattern stitches, lace patterns, cable patterns, etc. Basically any grouping of stitches that combine to make a pattern from the variations in stitches used.
I think making a swatch of the stitch patterns used in a written pattern provides a great deal of useful information about how the finished garment will look and feel – and fit! It’s also good practice before doing it as part of your finished item.
Keep in mind that most written patterns only give gauge in stockinette stitch and while that tells you what the designer’s gauge is – it does not tell you how the gauge changes in the stitch pattern(s) used in knitting the garment. If you find a written pattern that states the gauge of the stitch pattern – great. But does your gauge match that? Swatching is the only way you will know.
If you are only using one stitch pattern, then knitting a swatch with two or more pattern repeats will help you figure out how the pattern affects the width and length of the garment and what adjustment you might need to make to obtain the correct size of garment you want. If you combine it with your ribbing, you will see how the ribbing affects the transition to the main fabric of the garment.
If you are combining more than one stitch pattern within the main fabric of a garment, I recommend doing individual swatches for each stitch pattern to use as a gauge swatches.
Crest of Wave Lace Pattern
Garter Stitch
Embossed Moss Stitch Ribbing
Then to see what happens when the stitch patterns are combined, you should do a swatch large enough to include all of the stitch patterns used in the order you plan to use them. This may end up being a very large swatch – even enough stitches for the back of your garment. This type of swatch will provide you with a lot of helpful information and give you insight into what adjustments you might need to make for a great fitting garment. More on this in a later post.
So – I started a pair of socks – plain label version, cuff-down with 2 X 2 ribbing for the heel and instep. I used Knit Picks Stoll in Carbon Twist colorway. I got about 6 inches of the cuff done before Christmas and so I wrapped the “in progress” socks up along with two additional balls of yarn (Knit Picks Stoll – Merlot colorway) for another pair of socks and gave it to him as a Christmas present, with the promise that they would actually become socks.
I love your socks! I hate pink normally but the pink and the grey are awesome together!